Measure - be sure

Products

Wireless transmitters

FLTA
	FLTA is a base station for wireless sensors. FLTA has 8 x 0..10Vdc outputs that can be configured for temperature, humidity, setpoint or 5-position switch. FLTA module acts also as a Modbus Communication interface for sensor readings. The FLTA control module monitors the room units for any malfunctions and for the low battery level.

FLAN
	FLAN antenna is for the FLTA base station. FLAN has 4m cable with screw connector and a magnetic base.

FLSER
	FLSER wireless configuration tool is designed for setting the wireless address of the TEFL room sensors, and the FLREP wireless repeaters. The unit can also be used for testing the communication signal strength.

TEFL

TEFL

TEFL wireless room temperature sensors are designed for temperature detection of indoor spaces. Wireless room sensors operate in 868.30 MHz range and are Lithium battery powered. The communication between the TEFL room units and the FLTA base station is two-way. The measurement readings are transmitted on change, or at least every hour. Each TEFL sensor is configured at the commisioning stage with its own sensor identification number (SID) and the base station identification number (MID). The addressing is done wirelessly by using the FLSER configuration tool.

TEFL-RH

TEFL-RH

TEFL-RH wireless room temperature and humidity sensors are designed for temperature and humidity detection of indoor spaces. Wireless room sensors operate in 868.30 MHz range and are Lithium battery powered. The communication between the TEFL room units and the FLTA base station is two-way. The measurement readings are transmitted on change, or at least every hour. Each TEFL sensor is configured at the commisioning stage with its own sensor identification number (SID) and the base station identification number (MID). The addressing is done wirelessly by using the FLSER configuration tool.

TEUFL
	TEUFL is a wireless battery operated transmitter using 868.30 MHz frequency and FSK modulation. Totally two signals can be sent to the base station; temperature and 010Vdc. Sensor element for temperature is built-in but it can be replaced by an external Pt1000 temperature sensor. There is a two-way communication between transmitters and the base station.

KLUFL
	KLUFL is a wireless battery operated transmitter using 868.30 MHz frequency and FSK modulation. Totally three signals can be sent to the base station; humidity, temperature and light level. Sensor elements for humidity and temperature are builtin but for the light level detecting is needed external LUX 11 sensor. There is a two-way communication between transmitters and the base station.

HDHFL / HDHFL-N
	HDHFL transmitters are made for detecting carbon dioxide concentration and temperature in the room spaces. HDHFL-N is like HDHFL, but with a display. Supply of 24Vac/dc is needed. FLTA base station and FLAN antenna is needed for forwarding the signals. FLSER tool is needed for commissioning.

HDHFL-RH / HDHFL-RH-N
	HDHFL-RH transmitters are made for detecting carbon dioxide concentration, temperature and humidity in the room spaces. HDHFL-RH-N is like HDHFL-RH, but with a display. Supply of 24Vac/dc is needed. FLTA base station and FLAN antenna is needed for forwarding the signals. FLSER tool is needed for commissioning.

LAFL / LAFL-LX
	LAFL is a wireless battery operated detector using 868.30 MHz frequency and FSK modulation. Totally two signals can be sent to the base station; occupancy and light level (LAFL-LX).

FLSNIF

FLSNIF

FLSNIF is a tool for monitoring the functionality of the wireless network. By using this tool you may follow one by one the traffic of signals between the wireless field equipments and the base station. Monitoring is possible only for signals which are available at the very moment. For using the tool it is needed a PC with a loaded software delivered with the tool. FLSNIF will be connected to the USB port of the PC. At the display of PC you may follow how the communication is working between a transmitter and / or a repeater and a base station, but you cannot see the contents of the signals.

RYFL
	RYFL is a wireless locally powered 230 Vac (24Vac) IO-module using 868.30 MHz frequency and FSK modulation. It is made for providing wireless building automation measurements and controls. All communication between the control system and IO-module will be made via FLTA base station using Modbus.

FLREP

FLREP

FLREP repeaters can be used to extend and boost the range of TEFL wireless room sensors in difficult environments. It is possible to use up to 8 repeaters for one FLTA base station. FLREP are powered locally from 12-24Vdc or 24Vac supply. Each FLREP repeater is configured at the commisioning stage with its own repeater identification number (RID) and the base station identification number (MID). The addressing is done wirelessly by using the FLSER configuration tool.

FLREP-U

FLREP-U

FLREP-U is a bi-directional repeater working on the frequency of 868.30 MHz. It is possible to use up to 8 repeaters for one FLTA base station to extend and boost the ranges of wireless transmitters in difficult environments. FLREP-U repeaters are powered locally by a 12-24Vdc or 24Vac supply. Each FLREP-U repeater is configured at the commissioning stage with its own repeater identification number (RID) and the base station identification number (MID). The addressing is done wirelessly by using the FLSER configuration tool.